Use of Cookies
By continuing your visit on our website, you consent to the use of cookies. Further information
Close

We use cookies on different pages to make visits of our website attractive and enable use of certain functions. These are small text files stored on your computer. Most of the cookies we use are deleted again from your hard disk after the end of your browser session (so-called session cookies). Other cookies will remain on your computer and make it possible for us to recognise your computer again at your next visit (so-called permanent cookies). Our partner companies have no right to collect personal information via cookies through our website, to process or use them.
X

The renovator


GRUNDOBURST 1900G

The best thing for pipe renewal

QUICKLOCK BURST RODS

  • Quick locking couplings without thread (QuickLock), no lubrication required, therefore no time consuming screwing together required
  • Quick rod insertion and removal
  • The rods are connected faster than threaded rods
  • Absolutely push and pull resistant
  • Able to negotiate bends
  • Integral production, therefore highly resistant to stress
  • Robust, low-wear as clamping is not required
  • No slipping back of the rods, due to direct force transmission
  • Rod system with convenient rod accessories
  • Longer service life than screwed rods
  • QuickLock bursting rods are available from 35 mm diameter for pipes from ND 50
  • Other rod diameters: 54 mm, 75 mm, 100 mm, 120 mm and 140 mm
  • Compact dimensions for small pits
  • Can be applied from a pit in both directions
  • Fast operating cycles and high output
  • Rapid rod pushing through old pipe and during new pipe installation
  • Quick to get started
  • All machine models have remote control
  • Low weight for easy transport
  • Accessories specific to the procedure
  • Stable and job-site specific constructionto withstand the highest of loads and strain
  • Long service life and lowmaintenance effort
  • Ergonomic operation andhigh level of work safety
  • CE-certified

REQUEST FREE CONSULTATION NOW.

TECHNICAL SPECIFICATIONS



  • The GRUNDOBURST 1900G generates a max. pulling force of 427,136.91 lbf (190 t). This allows renewal of defective pipes from ND 9.84 to 31.50 inches lengths of 984.25 ft max.
  • The rods are 88.58 inches long and weigh 363.76 lbs each, the permissible bending radius is only 180.45 ft.

Collector renewed in the Minderbach valley by means of pipe bursting

By Dipl.-Geogr. Gerhard Renz, Isas GmbH, Site Manager, Germany
Photos: Isas GmbH

The nature conservation authorities agree: small intervention with a big effect! The collector of AZV Nagold was renewed continuously over a length of 1,200 m by means of burstlining, the cross section was expanded from DN 300 to DN 400. The minimally invasive intervention in the sensitive eco system of the Mindersbach Valley was fortunately also the best economic solution. Find out more

TECHNICAL SPECIFICATIONS

PERFORMANCE DATA
GRUNDOBURST 1900G TT B110 OR TT B250 metrical
GRUNDOBURST 1900G TT B110 OR TT B250 imperial
Dimensions of rig LxWxH:
2.850 x 1.150 x 1.000 mm
112.20 x 45.28 x 39.37 in
Weight of rig:
3.320 kg
7,319.34 lbs
Thrust:
716 kN
160,963.24 lbf
Pulling force at 250 bar:
1.900 kN
427,137.10 lbf
Pit size LxW:
8.000 x 2.000 mm
314.96 x 78.74 in
Axle height:
400 mm
15,75 in
Drive output at 2,000 rpm • 2,300 rpm • 3,000 rpm:
127 • 55,1 • - kW
170.31 • 73.89 • -
Hydr. operating pressure:
250 bar
3,625.95 psi
Old pipe Ø:
ND 250 - ND 800 mm
ND 9.84 - ND 31.50 in
For pipe materials:
PVC, PE, stoneware, ductile/grey cast iron, AC, GFRP, steel
PVC, PE, stoneware, ductile/grey cast iron, AC, GFRP, steel
New pipe Ø:
up to OD 900 mm
up to OD 35.43 in
For pipe materials:
PVC, PE, stoneware, grey cast iron, GFRP, steel
PVC, PE, stoneware, grey cast iron, GFRP, steel
Bursting rod Ø:
120 mm
4,72 in
Bursting rod Ø alternative:
- mm
- in
Bursting rod weight:
165 kg
363.76 lbs
Effective bursting rod length:
2.250 mm
88.58 in

DO YOU HAVE ANY QUESTIONS?

WE WILL BE GLAD TO HELP YOU!

YOU CAN REACH US
BY PHONE FROM
MONDAY TO FRIDAY
07:00 TO 17.00 O'CLOCK!

CALL US!

SEND US A MESSAGE
AND WE WILL GET BACK
TO YOU!

WRITE TO US!
Contact

Do you have any product or
services related questions?

Please contact us:

+49 2723 808-0

SEND E-MAIL