Use of Cookies
By continuing your visit on our website, you consent to the use of cookies. Further information
Close

We use cookies on different pages to make visits of our website attractive and enable use of certain functions. These are small text files stored on your computer. Most of the cookies we use are deleted again from your hard disk after the end of your browser session (so-called session cookies). Other cookies will remain on your computer and make it possible for us to recognise your computer again at your next visit (so-called permanent cookies). Our partner companies have no right to collect personal information via cookies through our website, to process or use them.
X

The renavator


GRUNDOBURST 2500G

The best thing for pipe renewal

QUICKLOCK BURST RODS

  • Quick locking couplings without thread (QuickLock), no lubrication required, therefore no time consuming screwing together required
  • Quick rod insertion and removal
  • The rods are connected faster than threaded rods
  • Absolutely push and pull resistant
  • Able to negotiate bends
  • Integral production, therefore highly resistant to stress
  • Robust, low-wear as clamping is not required
  • No slipping back of the rods, due to direct force transmission
  • Rod system with convenient rod accessories
  • Longer service life than screwed rods
QuickLock bursting rods are available from 35 mm diameter for pipes from ND 50.
Other rod diameters: 54 mm, 75 mm, 100 mm, 120 mm and 140 mm.
  • Compact dimensions for small pits
  • Can be applied from a pit in both directions
  • Fast operating cycles and high output
  • Rapid rod pushing through old pipe and during new pipe installation
  • Quick to get started
  • All machine models have remote control
  • Low weight for easy transport
  • Accessories specific to the procedure
  • Stable and job-site specific construction to withstand the highest of loads and strain
  • Long service life and low maintenance effort
  • Ergonomic operation and high level of work safety
  • CE-certified

REQUEST FREE CONSULTATION NOW.

TECHNICAL SPECIFICATIONS



  • The GRUNDOBURST2500G sets the benchmark for trenchless pipe renewal. It generates a maximum pulling force of 573,262.70 lbf (255 t). This allows the renewal of old pipes from ND 11.81 to ND 47.24 inches
  • The rods are 86.61inches long and weigh 462.97 lbf each. For steel pipe relining projects, mains lengths up to 4,199.46 ft can be pulled in.

TECHNICAL SPECIFICATIONS

PERFORMANCE DATA
GRUNDOBURST 2500G
Dimensions of rig LxWxH [mm]:
116.14 x 62.99 x 59.06
Weigh of rig [kg]:
9,038.94
Thrust [kN]:
237,173.39
Pulling force at 250 bar [kN]:
573,262.70
Pit size LxW [mm]:
354.33 x 98.43
Axle height [mm]:
19.69
Recommended hydraulic station:
TT-B250
Drive output [kW]:
170.31 at 2,000 rpm
Hydr. operating pressure [bar]:
3,625.95
Old pipe Ø [mm]:
ND 11.81 - ND 47.24
For pipe materials:
VCP, lead, PVC, PE, grey/ductile cast iron, AC, GFRP, steel
New pipe Ø [mm]:
up to OD 47.24
For pipe materials:
PE, PP, VCP, ductile cast iron, GFRP, steel
Bursting rod Ø [mm]:
5.51
Bursting rod weight [kg]:
462.97
Effective bursting rod length [mm]:
86.61

YOU HAVE ANY QUESTIONS?

WE WILL BE GLAD TO HELP YOU!

YOU CAN REACH US
BY PHONE FROM
MONDAY TO FRIDAY
07:00 TO 17.00 O'CLOCK!

CALL US!

WRITE US A MESSAGE
AND WE WILL GET BACK
TO YOU!

WRITE US!
Contact

Do you have any product or
services related questions?

Please contact us:

+49 2723 808-0

SEND E-MAIL