Use of Cookies
By continuing your visit on our website, you consent to the use of cookies. Further information
Close

We use cookies on different pages to make visits of our website attractive and enable use of certain functions. These are small text files stored on your computer. Most of the cookies we use are deleted again from your hard disk after the end of your browser session (so-called session cookies). Other cookies will remain on your computer and make it possible for us to recognise your computer again at your next visit (so-called permanent cookies). Our partner companies have no right to collect personal information via cookies through our website, to process or use them.
X

SMALL POWER PACK

Property service connections for gas, water, electricity, fibre optic cables and sewer pressure pipes can be installedquickly and economically with the fluid-assisted mini drill rig GRUNDOPIT PS60. The GRUNDOPIT PS60 can be launched from out of a small pit or, if applicable, directly from a utility room in the basement. If the bore is carried out directly into the building, the brickwork is sealed with a wall duct and a head access hole in front of the building wall is not required. In addition to installing property service connections, crossings beneath traffic ways, rivers and brooks are easily achieved as well.
 
Despite its small external dimensions, the GRUNDOPIT PS60 provides a powerful stroke allowing for the application of rods with an effective length of 750 mm. With its high torque of 1,500 Nm, the maximum rotation number of 150 rpm and pushing and pulling forces of up to 6 t, working in difficult soil conditions is relatively trouble free.

QUICKSTARTER

COMPACT, POWERFUL, PROFITABLE

CONTROL PANEL

The well laid-out, swivelling control panel is made for comfortable handling and control over the drill rig from every position.
  • 01.Coupling of the hydraulic lines directly to the rig – operator protection
  • 02. Effective rod length 750 mm with only 1,370 mm rig length – for fast and productive work, even in extremely limited spaces
  • 03. Hydraulic clamp – safe, comfortable, quick and easy rod exchange, clamping is possible in every position
  • 04. Thrust via cylinder drive – full power is provided from the start
  • 05. Fold-out footboard – for safe and clean standing
  • 06. Two-step rotation – optimal adaptation to the soil conditions/upsizing diameters
  • 07. Hydraulic tensioning in the work pit – short setup times, high self-support
  • 08. Fold-out control panel – compact transport position, quick set-up

REQUEST FREE CONSULTATION NOW.

TECHNICAL SPECIFICATIONS



  • Two-stage rotation
  • Hydraulic clamping
  • Effective length of rods 750 mm with a riglength of only 1.370 mm
  • Thrust by means of cylinder
  • Fold-out control board
  • Hydraulic bracing in work pit
  • The hydraulic line is coupled directly with the rig
  • Rotary drive with quick-locking rods (replacement of single wear parts)
  • Unfolding clamp

Drainage pipe installation with GRUNDOPIT 40/60

The Polish town of Sady has a population of 890 and lies roughly 14 km north-west of the state's main city of Poznan, the airport of which, Poznan-Lawica, is just 13 minutes away by car. Dissecting the small town is the state road DK 92, a main road with 4 lanes. And passing close by Sady in the east is the motorway-like S11. The town is therefore extremely well placed strategically for industry and trade – and this is not just local knowledge: Across a wide area on the left and right of the state road is a row of huge buildings mainly from logistics organisations but also production halls from machine manufacturers, the food and packaging industry, building material suppliers, automotive supply outfits etc. as well as extensive warehouses from large online companies. The signs on the road and on the halls represent almost without exception companies and groups of companies that operate on an international scale. Find out more

TECHNICAL SPECIFICATIONS

PERFORMANCE DATA
GRUNDOPIT PS60 metrical
GRUNDOPIT PS60 imperial
Thrust and pullback force:
60 kN
13,489 lbf
Installation speed (without load):
5 m/min
16 ft/min
Max. torque:
1.500 Nm
1,106 lbf ft
Max. spindle speed:
150 rpm
150 rpm
HP Bentonite pump (not included):
40 l/min*
10.6 gpm*
Bore rod Ø:
51 mm
1.89/1.50 in
Effective rod length:
750 mm
30 in
Rod weight:
6,2 kg
19.84 lbs
Pilot hole Ø:
80 mm
3.15 in
Min. drilling radius:
26,5 m
87 ft
Length (transport position):
1.375 mm
54.1 in
Width (transport position):
620 mm
24.4 in
Height (transport position):
880 mm
34.6 in
Length (working position):
1.375 mm
54.1 in
Width (working position):
1.100 mm
43.3 in
Height (working position):
1.450 mm
57.1 in
Max. weight:
490 kg
1,080 lbs
Upsizing Ø, depending on ground ≤:
260 mm
10.24 in
Outer pipe Ø, depending on ground ≤:
200 mm
7.87 in
Bore length, depending on ground ≤:
100 m
328 ft
Required hydraulic fluid volume without MA09:
70 l/min
2.47 cfm
Required hydraulic fluid volume with MA09:
100 l/min
3.53 cfm
Required max. hydraulic fluid pressure:
250 bar
3,626 psi

DO YOU HAVE ANY QUESTIONS?

WE WILL BE GLAD TO HELP YOU!

YOU CAN REACH US
BY PHONE FROM
MONDAY TO FRIDAY
07:00 TO 17.00 O'CLOCK!

CALL US!

SEND US A MESSAGE
AND WE WILL GET BACK
TO YOU!

WRITE TO US!
Contact

Do you have any product or
services related questions?

Please contact us:

+49 2723 808-0

SEND E-MAIL